Fluid Components International’s twin alarm FLT93 Series flow change provides an early warning alert to the potential of dry running circumstances, cavitation and different pump points that may result in emergency shutdowns and expensive upkeep.
pressure gauge octa and temperature of liquids, gases, and slurries. – Image: Fluid Components International

FCI’s FLT93 Series move swap reliably monitors the circulate and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, the place sudden, unexpected reductions in media circulate charges can depart pumps susceptible to over-heating circumstances that shutdown course of traces and require troubleshooting and fixing. เพรสเชอร์เกจ rated instrument is meant for heavy-duty, probably hazardous process trade environments and comes with a complete record of global safety approvals.
It has a no moving components design and presents a robust scheme for pump safety with its twin alarm capability. With Alarm 1, the swap detects a low flow scenario anyplace between zero.01 and 3 ft per second FPS (0.003–0.9 m per second MPS). This low move alarm is a pre-warning signal for the control system or operator who can then determine to keep the pump operating or to close it down.
If an Alarm 2 happens as a end result of the feed line to the pump is running dry, this would be an emergency sign to close down the pump instantly because the bearings now see fuel as a substitute of a liquid as a heat transfer media. In such situations, the temperature of the bearings may rise very fast. Using a move switch prevents everlasting damage to the pump’s bearings.
Share

https://superwhatevr.com/
https://shenafu.com/
https://cloud9skin.com/
https://digitalimaginary.com/
https://coca.com/samehadaku/